The LED handrail system LUX GLENDER BASIC is probably the "simplest" illuminated handrail with LED in the world. It is best used to accentuate and illuminate stairs and paths in private homes, gardens, commercial buildings, doctors' surgeries, company premises and all areas that require good, sure-footed lighting and are not exposed to the risk of vandalism.
The LED handrail from the BASIC system is characterised by a very simple and quick installation. First the handrail profile is installed, then the LED strip is glued in place and finally the cover is clipped in place. The LED handrail is ready! The cover can be removed just as easily as it was clipped in. Maintenance or modification of the LED handrail can thus be carried out without further ado. In private or semi-public spaces, it is an elegant and high-quality handrail lighting with an unbeatable price-performance ratio.
We carry two LED strip lines that meet the different needs of our customers - "Standard" and "Professional". The "Standard" LED technology is suitable for private owners, or for projects with "normal" requirements. An imported, high-quality LED strip of tested quality is offered. The "Professional" LED strip is manufactured in Germany and meets the highest requirements. It is highly recommended for demanding projects such as bridges, in public and semi-public areas. The use of high-quality materials saves a lot of money in the long term and provides long-lasting pleasure. System BASIC is very well suited for spiral and curved LED handrails.
With this standard assembly of the LED handrail, the hand can glide through unhindered. This variant can be implemented for all common posts and handrail brackets.
The light band is interrupted by the base holders. LED strip inside the handrail can, however, be continued without interruption. This interruption of the continuous row is not visible on the floor.
The light band can only be seen from below, not from the side.
With this fastening variant, fewer components are required, but more effort is needed on the part of the welder.
The LED handrail is turned in the direction of the staircase, so that a wider staircase can be illuminated more evenly.
The light band is not interrupted and can be seen from the side.
This variant offers designers the possibility of combining a homogeneous light band with the advantages of asymmetrical illumination.
If the handrail brackets are positioned correctly, the user's hand can also glide through unhindered with this variant.
This modification is often used for bridges, terraces and other applications that do not require the hand to glide through freely.
In this case, the handrail holder is welded to the side of the LED handrail. The light emitting surface can be parallel to the ground or also rotated.
This mounting variant enables a continuous homogeneous light band and easy connection to posts made of other materials. The handrail bracket can be screwed to the posts, e.g. made of steel. This results in cost savings due to few components.
(also called opaque / frosty or milky cover) This cover strip diffuses the light homogeneously in all directions. It enables a homogeneous light band on the LED handrail. The individual LED points are not visible.
With a handrail height of approx. 85 cm and an opal/symmetrical cover strip, uniform staircase lighting is possible at approx. 60-70 cm from the handrail. With an asymmetrical cover, 120-150 cm can be achieved.
+ homogeneous light band
+ less expensive
+ easier to install
+ sufficient for most applications
- uneven illumination of wide staircases, bridges, walkways
+ even illumination of wide stairs, bridges, walkways
+ LED handrail on one side could be sufficient
- individual LED points can be seen (no homogeneous light band)
- more precise mounting required